|
|
Design of appliance for assembling of sealing
Vávra, Jan ; Vlašic, František (referee) ; Prokeš, František (advisor)
The object of this bachelor thesis is designing and constructing plant for manual deployment rubber gasket while production connectors to cars. Part of the work is devoted general orientation the assembly plant, another part is devoted itself alternative solutions design variants and selection of appropriate alternative solutions. The reset of this work is 3D model of plant.
|
|
|
Influence of optical connectors and of other effects on optical link attenuation
Winkler, Aleš ; Křepelka, Václav (referee) ; Filka, Miloslav (advisor)
In this time the metalic wires meet not the requirements of high capacitance and rate wire and so the new, modern fiber wires are more and more being used. This bachelor`s thesis deals with three basic kinds of connections of fiber wires, optical connector, mechanical coupling a optical weld, and their effect on optical link attenuation realized by fiber optics. The optical link is possible realized number of kinds fiber optics. In this thesis are most often used multimod and a little multimod fiber optics. By mechanical coupling are explored their effects of attenuation on optical link a their detrition after disconnection and next connection back to the optical line. For optical weld is explored quality assignet optic welder. For optical connectors is explored their quality of cleanness through apparatus OTDR( Optical Time Domain Reflectometer) and geometrical properties through apparatus FIBO 250.
|
|
|
POF - Polymer optical fibers
Janovský, Marek ; Šifta, Radim (referee) ; Filka, Miloslav (advisor)
This document informs readers with polymer optical fibres (POF). The first section summarizes basic properties and differences between polymer and glass optical fibres. The second section contains list of POF types, their differences in the structure and refractive indexes. Further is described preparation of fibre surface for connector pin and connector types, which are used for POF. Next section contains usage of POF in access networks, types of access networks and FTTx network types. The document continues design of FTTH, FTTB and LAN for home application. The practical part deals with basic measurements with POF, production of coupler and measuring response at test ranges. The final section summarizes the overall findings and results.
|
|
|
Extensible measurement socket placement optimalization with respect to the higher number of conductors
Šindler, Matěj ; Čepička, Martin (referee) ; Wasserbauer, Vojtěch (advisor)
In opening, this bachelor thesis is describing structure and basic block description of UniGear switchgear manufactured by ABB company. Then this thesis focus on current and voltage transformers and sensors often used in this type of switchgear. Main part of this thesis is dedicated to evolution and description of connector, used in connection solution of withdrawable metering unit with low-voltage compartment. Next part states the main requirements for new connector, that will replace current connector in future solution. In following part there is a list of different options for new connector with their biggest strengths and weaknesses pointed out. Then there is list of alternative placements for new connector. In final part is chosen and described new connector and its placement. This solution is valuated and backed up by created 3D models.
|
|
|
Production of connector
Kočka, Jiří ; Rumíšek, Pavel (referee) ; Žák, Ladislav (advisor)
The diploma thesis deal with the proposal of connector manufacturing from bronze sheet CuSn6, thickness 1.5mm in production volume of 1.600.000 parts per year. From considered manufacturing variants there was chosen shearing and forming technology of thread in the progressive stamping die. For part production was selected pressing machine Bruderer 1250 with nominal pressing force 1250 kN from company E. Bruderer Maschinenfabrik AG. In the economical evaluation there were determined expenses 21.6 Kč per one piece including demanded profit. The turning point was calculated at production of 165.522 parts.
|
|
|
Effect of optical connectors quality on transmission
Bernkopf, Miroslav ; Křepelka, Václav (referee) ; Filka, Miloslav (advisor)
This diploma thesis deals with optic fiber connectors and their influence on transmissions realized via fiber optics. Optical fibers and lightguides play the key role in telecommunications because of constant demands of higher bandwidth and data rates. Original metalic wires do not meet market requirements and so the fiber optics are more and more being used. There are various types of fibers and there are also many ways of connections. This work deals with demountable way of connection – optical connectors, which have the biggest influence on a total attenuation and route length. Connector has to meet various requirements such as cleannes, quality, mechanical construction and ferrule polishing.
|
|
|
Manufacturing of connector
Kočka, Jiří ; Žák, Ladislav (referee) ; Podaný, Kamil (advisor)
The bachelor thesis deals with a concept of the production technology of the connector. It is made of CuSn6 bronze plate of width 0,25 mm, production batch of 1 200 000 pieces per year.There was performed a recherche based on the topic. Out of available technologies for the production were chosen cutting and forming in follow die. For the cutting of the bronze plate was chosen high-speed press machine Bruderer 18 with nominal pressing force of 180 kN made by E. BRUDERER Maschinenfabrik AG. The production costs per one piece were evaluated in the economic analysis including manufacturer profit and there was defined break-even point which occurs after production of 876 282 pieces.
|
|
|
Transmission parameters of optical access networks
Ježek, Jaroslav ; Kapoun, Vladimír (referee) ; Havelka, Dušan (advisor)
The essence of this thesis is the cognition of theoretical basis for measuring on optical fibres, elements and optical wireway as well. This work describes the methods of measuring and detection of parameters of these networks. The gained knowledge is followed by its application on two laboratory tasks. The first task is focused on usage of method of embedded loss for measuring of attenuation of fibre and followed by usage of the method OTDR for localization of defect. The second task is focused on measuring of attenuation on passive optical element using only the method of embedded losses. The laboratory tasks were described and respective conclusion and findings were drawed from each other.
|
|
| |
|
|
Optical transmission applications in industries
Worbis, Vít ; Křepelka, Václav (referee) ; Filka, Miloslav (advisor)
The aim of the semestral work term use of optical transmission in the industry is to find the right equipment for communication in industrial applications, which would lead to better control and management of these applications. My show almost seamless connection between the device, which is controlled by another device such as a computer. The first chapter shows how inside the core optical fiber and reflected beams are then carried around the skylight. The second section lists the differences between the copper and fiber cabling, there is described why metallic line slowly destroyed and replaced him fully optics. In the third chapter, I focused on the optical fiber, what are its characteristics, from which parts are made and what is distributed. In the fourth part shows the optical transmitters for multimode and singlemode optical fibers, which are differences between them, which are produced and with what characteristics, etc. In the fifth chapter is applied to a network of possible involvement in the industrial zone, is designed only as they could theoretically be industrial zone controlled by the machine. In the sixth part of the thesis I have tried to design a laboratory task that consists of those optical converters. It is only a small sample, as used in the industry far more extensive involvement.
|
guest ::
